IMS Insights / Article 01
E-Bike and E-Scooter Battery Safety in Apartment Buildings: A Canadian Guide
For property owners, condominium boards and building managers
Edition
Two residents come home. One locks her e-bike in the bike room and carries the removable battery upstairs. The other rides an e-scooter with a built-in battery. He needs to bring the whole scooter to an outlet, but the nearest one is beside the stair door. Where can each resident charge without putting someone’s way out at risk?
This guide uses electric micromobility devices as an umbrella term for e-bikes and electric kick scooters (e-scooters). Both use lithium-ion batteries in the examples that follow. For a property manager or condominium board, a good first step is to walk the route with riders of each. See where they park, where they plug in and who would notice a problem. That walk can reveal whether a change in practice, a different room or new equipment would help.
What happens when a battery fails
A lithium-ion pack in an e-bike or e-scooter contains a group of cells. If a damaged or defective cell starts producing heat faster than it can shed it, chemical reactions inside it can generate still more heat. This self-heating process is called thermal runaway. It can spread to neighbouring cells and release hot gases and hazardous smoke. A battery can reignite after visible flames have subsided. In a building with one way out of a suite, where this happens matters as much as what started it. [1–3]
Most rechargeable batteries work safely when used as intended. A crushed case, an improvised repair or a charger intended for another pack changes that picture. A plug that fits tells a rider little about whether the charger will control charging correctly. Health Canada advises owners to use the original battery and charger specified for the device and to obtain original replacement parts. [1, 2]
Where charging actually happens
Walk the property when riders are returning home. Can a resident manoeuvre a cargo e-bike through the door without propping it open? Can an e-scooter rider lock the scooter to the rack and leave it stable with the aisle clear? Ask each rider to show you where the charger plugs in. Look for cords crossing a walkway, then ask what happens when snow blocks the route or someone takes the last space.
Plan for parking and charging separately. A rack may secure an e-bike while its removable pack charges in a bedroom. A folding e-scooter may fit in a suite closet but needs a different location to charge. Keep exit routes clear and identify places where smoke could cut off someone’s way out. Nova Scotia’s Office of the Fire Marshal advises keeping devices away from exits and using manufacturer-approved charging equipment. [3]
What residents need to know
Charge on a stable, hard surface away from bedding, paper and other materials that can burn. Choose a time when someone is awake and present, and disconnect the charger when charging is complete. Staff can make these instructions easier to follow by posting them where residents plug in. [1–3]
After a winter ride, let the e-bike, e-scooter or removable battery warm gradually to room temperature in a dry place clear of exits. Charging a very cold battery can damage it. Before plugging in, follow the manufacturer’s charging temperature limits and check that the charging port and plug are dry. Melting snow or condensation can leave connections wet, and road salt can corrode exposed electrical contacts. If you see corrosion or suspect water has entered the battery, leave it unplugged and ask the manufacturer or a qualified service provider for advice. [14–16]
A fall may damage a pack even if the e-scooter or e-bike still runs. Stop using or charging a battery that has swollen, leaked, suffered significant impact or started making unusual sounds. For a damaged pack without active signs of fire, contact the manufacturer and the municipality’s battery disposal service for handling instructions. Describe its condition before taking it anywhere. Keep it out of household garbage and ordinary recycling. Smoke or a rapidly worsening condition calls for an emergency response. [1–3]
Which rules apply to this building?
Start with the address and the proposed activity. A superintendent managing a blocked exit needs the fire rules in force today. A board converting a storage room to shared charging also needs to establish which building and electrical approvals the work requires. Ask the local fire prevention office who has authority over the space and ask the electrical authority or a qualified electrical professional about the proposed installation. Keep the answers with the floor plan.
Model code and provincial law
The National Fire Code of Canada 2025 is a published model code. Provinces and territories decide which edition and amendments have legal effect in their jurisdictions. Nova Scotia’s Fire Safety Regulations adopted the 2020 National Fire Code with provincial modifications effective April 1, 2025. New Brunswick’s change to the 2020 edition took effect May 1, 2025. An owner with buildings in Halifax and Moncton should record the applicable provincial text for each property, even where the edition number matches. [4–6]
A proposal to watch in Ontario
On October 21, 2026, Ontario opened a consultation on proposed Fire Code changes. Among other measures, the proposal would prohibit charging, parking or storing lithium-ion-powered micromobility devices or their batteries in public corridors, exits and lobbies serving as access to an exit in residential occupancies.
The comment deadline was November 16, 2026. When reviewed on November 18, the Ontario Regulatory Registry entry was marked “Closed for comments” and did not display a decision notice or effective date. That status should not be treated as confirmation that the proposed requirements are in force. Existing exit requirements still apply. Check the regulation in force before revising building notices or citing a violation. [7]
What a product standard tells you
Health Canada and Transport Canada recommend ANSI/CAN/UL 2849 for e-bike electrical systems and ANSI/CAN/UL 2272 for personal e-mobility electrical systems, including e-scooters. UL 2271 addresses battery packs for light electric vehicles. A pack listing alone leaves open whether the complete e-scooter or e-bike has been evaluated with its charger. Ask for the certifier’s listing for the exact model and check its scope. These federal recommendations are safety guidance. Check the applicable law or contract for any requirement specific to your purchase or installation. [1, 8]
A resident policy people can follow
Name the e-bikes and e-scooters the policy covers and show where residents may park and charge each. Address bikes and scooters that need to stay with their batteries during charging, as well as packs designed to be removed. Give residents a map or photograph of the designated area. If every space is taken or the room is locked after hours, tell riders whom to contact.
Before adopting restrictions, check the lease or condominium documents and the applicable provincial rules on authority, notice and enforcement. Invite residents who use the space to test the proposed arrangements. Introduce the policy at move-in, explain changes to existing residents, and give staff a consistent way to handle a first report. For example, record the location and condition of a folded e-scooter obstructing a doorway, arrange to clear the route safely, and tell the resident where it can go.
Compare charging and storage options
Count how many e-bikes and e-scooters need space at the busiest time. Ask which models have a user-removable pack and which need to reach an outlet as a complete device. A cabinet for loose batteries may serve some riders well while leaving others searching for an outlet. If blocked doors are the immediate concern, secure parking on an accessible route may be the first priority.
Options to compare on a site walk
Secure parking without power. Check whether residents can lock both an e-bike frame and an e-scooter securely with the hardware provided. Leave room to manoeuvre and explain where charging is permitted.
Shared charging area. Test the layout with an e-scooter and an e-bike parked side by side. Can each charger reach its device without a cord crossing the aisle? Have qualified professionals review circuit capacity, siting, fire protection and emergency access. Assign someone to check the area and respond if an outlet fails.
Individual lockers or battery cabinets. For battery-only lockers, check that the pack is designed for rider removal. For whole-device lockers, try the actual bikes and scooters with their chargers connected. Confirm who receives an alarm after hours and how staff will take a compartment out of service.
Outdoor or detached charging. Consider exposure to water, winter temperatures, snow clearance, lighting and the route back to the entrance. Confirm the equipment’s environmental rating and the battery maker’s charging limits. A weather-resistant enclosure alone does not establish a suitable temperature inside.
Ask the supplier for evidence
Give every bidder the same mix of e-bikes, e-scooters and removable packs and request the exact model, certification listing, installation instructions and maintenance costs. For a containment claim, ask what battery energy and configuration were tested, what happened to smoke and gases, and which installation conditions the results depend on. ANSI/CAN/UL/ULC 1487 provides a standard for battery containment enclosures. Check the scope and limits of any claimed certification, including the intended location and energy rating. One component’s approval cannot establish the performance of a complete cabinet. [11]
Compare the cost of operating each option over its expected life, including inspections, software fees, replacement parts and staff time. Document unresolved questions before selecting a supplier. Even a tested enclosure leaves the building responsible for siting, day-to-day use and emergency arrangements.
Bring fire prevention and insurance into the decision
Before signing a purchase order, give the local fire prevention office a floor plan and description of the proposed use. Mark exits, nearby suites, the number of charging positions and how responders would reach the room. Ask what needs formal review and whether the building’s fire safety plan should change. Give staff a way to identify the room to emergency responders, including after a shift change.
Send the same description to the building’s broker or insurer. Ask which policy terms or conditions apply, what changes require notification, and what records the insurer wants to see. Ask for the response in writing and retain it with the renewal file. The Insurance Bureau of Canada encourages conversations about battery risks and coverage. Only the relevant policy and insurer can establish the coverage or pricing consequences for a particular building. [12]
Building self-assessment checklist
Use this list with a resident representative and the person responsible for daily operations. Mark each item yes, no or unknown. For every no or unknown, name an owner and a date to follow up.
- ☐ At the busiest hour, can an e-bike rider and an e-scooter rider each find secure parking and a permitted place to charge?
- ☐ Have we checked exit routes, charging surfaces and nearby combustible materials during an occupied evening?
- ☐ Has a qualified person assessed the proposed electrical load, and have we identified which approvals the work requires?
- ☐ Can a resident request an accommodation privately and obtain an answer from a named person?
- ☐ Do staff know whom to call about a damaged pack and what to do immediately if one is smoking?
- ☐ Can we produce the supplier’s model-specific evidence, maintenance instructions and written insurance correspondence?
When an independent review is useful
Integrated Micromobility Solutions (IMS) helps property owners, managers and condominium boards decide how to improve e-bike and e-scooter charging and storage. Our standard Halifax-area Charging & Storage Review includes a site visit and a review of relevant documents. We assess whether clearer rules, changes to an existing room or new equipment would help, and recommend what to do first. For a vendor-neutral comparison of suppliers and a plan for the work, we offer a separate Options & Implementation Plan. [13]
Contact IMS to talk through your building’s charging and storage needs. We start with your problem.
Frequently asked questions
Can a resident charge an e-bike or e-scooter in their apartment?
Check the applicable fire rules, building policy, tenancy or condominium documents, and any disability-related accommodation. Where charging is permitted, the resident still needs an appropriate charger, a suitable surface and a place away from the exit. If the only workable spot blocks the suite door, help identify another arrangement. [1, 3, 9]
How do I find the right charger for an e-scooter or e-bike?
Use the charger the manufacturer specifies for the exact device and battery. A matching plug or a certification mark on the battery alone cannot establish compatibility. If the original charger is lost, give the manufacturer or authorized dealer the model numbers before buying a replacement. [1, 8]
Where can someone charge an e-scooter with a built-in battery?
Identify a permitted space where the whole scooter can stand securely within reach of its charger, with doors and walkways clear. A battery-only locker serves riders whose packs are designed to come out. The same distinction matters for an e-bike with an integrated pack.
Can we use a spare storage room for charging?
Bring a plan and expected charger count to the local authorities and qualified electrical and fire protection professionals. Review the room’s construction, electrical capacity, fire protection, contents and proximity to exits. Confirm how residents will supervise charging and how staff will respond to a fault before designating the room.
What should a manager do first after a near miss?
If danger is ongoing, follow the building’s emergency procedures and call 911 from safety. Once the scene is safe, record what was observed, where the device was, and who responded. Review the event with the resident, staff and relevant professionals. A change as simple as providing a contact when the charging room is full may prevent the same circumstances from recurring.
Sources and further reading
Sources 1–13 checked November 14, 2026. Reference 4 verified November 18, 2026. Reference 7 supplemented with the Ontario Regulatory Registry record reviewed November 18, 2026. Winter charging sources 14–16 checked November 16, 2026.
- Health Canada and Transport Canada. E-mobility battery safety advisory, May 2023
- Canadian Centre for Occupational Health and Safety. Battery Charging – Lithium-Ion Batteries
- Nova Scotia Office of the Fire Marshal. Safe charging guidance, October 2, 2026
- National Research Council Canada. National Fire Code of Canada 2025
- Nova Scotia. Fire Safety Regulations under the Fire Safety Act
- New Brunswick. Regulation 2025-21 under the Fire Prevention Act
- Ontario Office of the Fire Marshal. Communiqué 2026-6, October 21, 2026. Ontario Regulatory Registry. Proposal 26-SOLGEN021 - Proposed changes concerning lithium-ion battery fire safety, reviewed November 18, 2026.
- UL Standards & Engagement. Standards supporting e-mobility device safety
- Ontario Human Rights Commission. Rental housing and the duty to accommodate
- Peel Living. Electric Micromobility Device Policy
- UL Solutions. UL 1487 and battery containment enclosures
- Insurance Bureau of Canada. A Growing Fire Risk in Plain Sight, August 18, 2026
- Integrated Micromobility Solutions. Services and scope of the Charging & Storage Review
- Health Canada. Lithium-ion battery safety
- London Fire Brigade. Heat, cold and rain: How weather conditions affect e-bikes and e-scooters
- Tern Bicycles. How to Care for Your Bosch E-Bike Battery
Brand credit IMS logo from the official IMS website.